FLEX POWDERDOSE: Increase precision, accuracy and speed of your solid dispensing tasks

For automated gravimetric dispensing / dosing of virtually any solid (low density and sticky solids, spheres, granulates, beads, tablets, etc.).

FLEX POWDERDOSE

Example Customer Testimonial

… best solid dispensing technology…

… for virtually any solid…

Key Advantages

  • Decrease in cost per sample up to 90+ %.
  • Increase in productivity by a factor of 10+.
  • The balance moves to the destination, increasing speed and efficiency.
  • Gravimetric solid dispensing (low density, sticky, any particle size, spherical or granulates shapes, beads and tablets) into an unlimited choice of vial / plate / reactor formats.
  • A large dispensing range, from sub mg up to several grams.
  • Powder dispensing / dosing robotic tool can be combined with other tools to accommodate multiple workflows (e.g. 4-Needle Head for volumetric liquid handling and sampling).
  • Dispensed amount and other data are stored in a read only log file.
  • Easy access to data with a convenient interface to pull results into Excel or virtually any other software.

Enhance your Efficiency and Productivity with our Workflow Solutions!


Gravimetric dispensing unit pick the appropriate solid

Pick the appropriate solid


Gravimetric dispensing unit moves to destination

Gravimetric dispensing unit moves to destination

Gravimetric dispensing unit dispenses into destination while weighing

Gravimetric dispensing unit dispenses into destination while weighing

FLEX POWDERDOSE further enabled by SWILE:

Compensation Dispensing provides Ultimate Combination of Speed, Accuracy and Precision

Unrivaled possibilities of extensions

Expand your workflow with e.g. barcode reading, (screw) capping and crimping, shaking, mixing, and even with dissolution or further features.

Technical Details

Chemspeed’s FLEX POWDERDOSE deck modularity allows the user to execute and perform a variety of workflows in a fully automated fashion.

The Gravimetric Dispensing Units (SWILE and GDU-P models) are used to perform automated, gravimetrically controlled dispenses of a wide range of solids and powders from sub milligram to multigram scale. The modules pick the appropriate solid, dispense the solid / powder, and then place the solid back to its station before picking the next one. Both dispensing units include an overhead balance and allow dispensing and simultaneous weighing of solids and powders into various vials, well-plates or reactor formats.

Gravimetrix dispensing units technical details

SWILE: First true 1 to 1 gravimetric pick & dispense of solid compounds

  • Picking & dispensing directly from almost any source into any destination.
  • Dispensing of a vast range of solid compounds from < 100 µg to 30 mg.
  • Disposable positive displacement tips.
  • No cross-contamination.
  • No dead volume.
  • A recovery rate equal or higher than in manual procedures.
  • Unattended operation (with optional inert atmosphere).
  • Picked & dispensed amounts and other data are stored in a read only log file.
  • Easy access to data with a convenient

SWILE overhead gravimetric pick & dispense
SWILE: Patented overhead
gravimetric pick & dispense
(10 µg resolution)

GDU-P models:

  • Typical dispensing time: 1 g in 20 sec (depending on powder flow properties).
  • Reduced dispensing time: the balance moves from one target to the next, continuously dispensing and weighing without having to move the target to the balance.
  • AutoTeaching tool to cover all your solids. Indeed, the software automatically finds the best parameters to dispense your powder.
  • Automatic exchange of a dispensing cartridge if one is empty or clogged (container spanning).
    Optional, work under inert gas.
  • Dispensed amount and other data are stored in a read only log file.
  • Easy access to data with a convenient interface to pull results into Excel or virtually any other software.

Gravimetric Fine Dispensing Unit for solids and powders
GDU-P:
The Gravimetric Fine Dispensing Unit
for solids and powders

Gravimetric dispensing unit for solids and powders
GDU-P:The Gravimetric Dispensing Unit
for solids and powders

Available upgrade options:

  • Powder dispensing / dosing robotic tool can be combined with other tools to accommodate multiple workflows (e.g. 4-Needle Head for volumetric liquid handling, e.g. sampling, dissolution).
  • Storage extension module for solid / powder dispensing containers.

Related pages

Need more info?

Use our interactive contact form or send us a direct email to [email protected]

Mailing list

We send out regular updates about what we are up to. If you'd like to receive these straight to your mailbox, please enter your email address below.

Follow us

google_pluslinkedinyoutube
Send