Automated Solid State Synthesis - SWING MEDTECH from CHEMSPEED

Decrease in cost per sample up to 90+ %.
Increase in productivity by a factor of 10+.
Gravimetric solid dispensing (low density, sticky, any particle size, spherical or granulates shapes, beads and tablets) into the rack / reactor format of your choice.
The balance moves to the destination, increasing speed and efficiency.
Balance resolution of 100 µg, or 10 µg.
A large dispensing range, from a few mg up to several grams.
Powder dispensing / dosing robotic tool can be combined with other tools to accommodate multiple workflows.
Dispensed amount, mixing speed, temperature, time…, and other data are stored in a read only log file.
Easy access to data with a convenient interface to pull results into Excel or virtually any other software.
Interface to DOE.

Enhance your Efficiency and Productivity with our Workflow Solutions!

SWING MEDTECH workflow - automated microwave synthesis

Breakthrough Dispensing Technology: Overhead Gravimetric Dispensing WHILE mixing, heating, refluxing and / or cooling.

Customer testimonial

“… best solid dispensing technology…

… for virtually any solid…”

Chemspeed’s SWING MEDTECH deck modularity allows the user to execute and perform a variety of solid dispensing and blending workflows in a fully automated fashion.

The Gravimetric Dispensing Units (GDU-P fd, GDU-P, GDU-HV, GDU-V models) are used to perform automated, gravimetrically controlled dispenses of a wide range of ingredients in the milligram to multigram scale. The modules pick the appropriate container, dispense the ingredients, and then place the container back to its station before picking the next one. All dispensing units include an overhead balance with a resolution of down to 100 µg, and allow dispensing and simultaneous weighing of ingredients into various vials, reactors, well-plates.

GDU-P fd: Automated Gravimetric Fine Dispensing Unit for Solids

The Gravimetric Dispensing Unit for solids and powders

Microwave reactor

The Microwave reactor

	Compound Type	Balance Readability	Dispensing Range and Viscosity Range	Dispensing Container Volume
The GDU-P fd	Solids and Powders	down to 100 µg, optionally down to 10 µg with second on-deck balance	100 µg to 20 g	30 mL (smaller volumes upon rquest)
The GDU-P	Solids and Powders		100 µg to 100 g	100 mL

Exemplary dispensing time: 1g in 20 sec (depending on powder flow properties).
Powder dispensing capacity: (expandable with additional powder storage module).
- SWING: up to 120 cartridges for the GDU-P fd, up to 32 cartridges for the GDU-P.
- SWING XL: up to 208 cartridges for the GDU-P fd, up to 56 cartridges for the GDU-P.
Reduced dispensing time: the balance moves from one target to the next, continuously dispensing and weighing without having to move the target to the balance. The anti-drip system avoids cross contamination and enables addition of powder or any other material into any formulation vessel, reactor, vial etc. on the platform deck while mixing, heating, cooling etc.
AutoTeaching tool to cover all your solids. The A.I. algorithm of the software finds automatically the best conditions to dispense your ingredient.
Efficient mixing of the final combinations.
Automated cleaning of the mixing module.
Automatic exchange of a dispensing cartridge if one is empty or clogged (container spanning).

Multiple dispensing configurations: one-to-one, one-to-many, many-to-one, many-to-many

Multiple dispensing configurations:one-to-one, one-to-many, many-to-one, many-to-many

SWING MEDTECH

Enhance your Efficiency and Productivity with our Workflow Solutions!

Breakthrough Dispensing Technology: Overhead Gravimetric Dispensing WHILE mixing, heating, refluxing and / or cooling.

Customer testimonial

Privacy Overview

Strictly Necessary Cookies