Glycerol methacrylate-based copolymers: reactivity ratios, physicochemical characterization and cytotoxicity

October 25, 2022

European Polymer Journal

Understanding the chemical composition of biocompatible copolymers is crucial for diverse biomedical applications such as the conjugation of polymers to drugs, peptides or proteins. Here, we report the Reversible Addition-Fragmentation Chain Transfer (RAFT) copolymerizations and reactivity ratios (r) of the less explored biocompatible copolymer systems based on glycerol mono-methacrylate (GMMA) monomer. Hence, we investigated the copolymerization of GMMA with the comonomers N-hydroxy succinimide methacrylate (NHSMA), N-isopropylacrylamide (NIPAM) and butyl acrylate (BuA). The estimated r values and sequence length distributions suggest that a chain radical of GMMA monomer prefers cross propagation in the system GMMA/NHSMA (rGMMA = 0.32 rNHSMA = 1.01). In the case of GMMA/NIPAM (rGMMA = 2.55 rNIPAM = 0.11) and GMMA/BuA (rGMMA = 3.31 rBuA = 0.66) systems, as shown by the relatively high rGMMA values in both copolymerizations, the formation of gradient copolymers might be favored. To understand the role of the comonomer composition in the thermal and solution properties of the final materials, the glass transition temperature (Tg) values of the copolymers, as determined by differential scanning calorimetry (DSC), were compared to build Tg vs. composition plots generated with the Fox, Brostow and Kwei equations. DSC investigations also revealed an interesting effect of molecular interactions between the polymer chains possibly formed via hydrogen bonding conveyed by the GMMA groups in the copolymers. Furthermore, light transmittance measurements of the poly(GMMA-stat-NIPAM) copolymer system in aqueous solutions revealed that the cloud point temperature (Tcp) of the solutions increases with the content of GMMA groups in the copolymer; however, this behavior was limited by the NIPAM composition (>0.74 mol fraction). Interestingly, a copolymer material with a GMMA/NIPAM composition (FGMMA/FNIPAM) of 26/74 exhibited a TCP = 38 °C, which is close to the human body temperature. Finally, cytotoxicity assays indicated the excellent biocompatibility of the obtained copolymers, which suggests that these copolymer systems might be suitable alternatives for bioconjugated systems in biomedical applications.

For details: 

Glycerol methacrylate-based copolymers: Reactivity ratios, physicochemical characterization and cytotoxicity

Carolina Ventura-Hunter a,b, Victor D. Lechuga-Islas a,b, Jens Ulbrich b, Carolin Kellner b, Ulrich S. Schubert b, c, Enrique Saldívar-Guerra a, Miguel Rosales-Guzmán d, Carlos Guerrero-Sánchez b, c

a. Department of Polymerization Processes, Centro de Investigación en Química Aplicada (CIQA), Blvd. Enrique Reyna No. 140, Saltillo, Coahuila 25294, Mexico

b. Laboratory of Organic and Macromolecular Chemistry (IOMC), Friedrich Schiller University Jena, Humboldtstrasse 10, Jena 07743, Germany

c. Jena Center for Soft Matter (JCSM), Friedrich Schiller University Jena, Philosophenweg 7, 07743 Jena, Germany

d. Universidad Tecnológica de Saltillo, Calle Nogal s/n, Ejido la Providencia, Saltillo, Coahuila 25300, Mexico

European Polymer Journal
Volume 178, 5 September 2022, 111478
https://doi.org/10.1016/j.eurpolymj.2022.111478

For more information about Chemspeed solutions:

ISYNTH

FLEX ISYNTH

Contact us to learn more about this exciting article:

https://www.chemspeed.com/contact-us/

Other Recent News

Discover more news articles you might be interested in

Read more about Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy
News Picture 1 1 V2
Featured
May
12

Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy

The design and synthesis of functional polymers, aimed at targeted properties through specific structures, have long been challenged by their complex and often nonlinear structure− property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and timeconsuming, making it difficult to balance accuracy and efficiency.

Read more about Localization, inspection, and reasoning (LIRA) module for autonomous workflows in self-driving laboratories
News Picture 1 1 V2
Featured
May
5

Localization, inspection, and reasoning (LIRA) module for autonomous workflows in self-driving laboratories

Self-driving labs (SDLs) combine robotic automation with artificial intelligence (AI) to allow autonomous, high-throughput experimentation. However, robot manipulation in most SDL workflows operates in an open-loop manner, lacking real-time error detection and error correction. This can reduce reliability and overall efficiency.

© Chemspeed Technologies 2026